Technicolor ATSC-8 Guia do Utilizador descarregar pdf (Página 7)

Technicolor MCS

101 W. 103

Indianapolis, IN 46290

www.technicolor.com/mcs

With the following result:

From our previous discovery, we showed both the known IP addresses and the AutoIP

addresses for each of the 4 addressable tuners in the ATSC-8. When making the requested IP

address change, each device receives 2 commands to change the IP with the second

command resulting in the change. In this example, the 4 tuners will have an IP address of

192.168.3.54, 192.168.3.55, 192.168.3.56 and 192.168.3.57. You can verify by again using

the DISCOVER button from the ATSC page. *Note that although the above screen shows the

Auto-IP addresses being changed, in fact they are not. A new DISCOVER command will show

only the variable addresses that have actually been changed.

Loading Data from the Tuners

From the factory, the ATSC-8 tuners will not be tuned to any channels or streaming any data,

however you may have a unit set up which has already been tuned and you’d like to see

what each tuner is playing. From the ATSC page, you can hit the LOAD button to have the

device send a report back to the COM1000 interface to see what the current configuration is

set to. Once you have run the load function, return to the ATSC page to see the results.

New IP Addresses

1 2 3 4 5 6 7 8 9 10

Sem comentários

Technicolor ATSC-8 Guia do Utilizador Página 7