Technicolor COM2000 Manual do Operador descarregar pdf (Página 82)

Following is a detailed list of the information available on the HealthInfo page.

Chassis – This field reports a unique identifier for the chassis. In systems that contain multiple

chassis, this can be used to identify each card in the system. See Section 4.1 on how to assign

unique identifiers to multiple chassis within a system.

Slot – This field identifies the card’s location within a chassis, numbered 1 through 12.

CardIP – This field shows the IP address of the COM46 card that resides in the chassis and slot

combination to its left.

Card_Temperature – Deprecated in the COM46.

IC_Temperature – This field reports the internal temperature of the main processor chip on the

COM46 card. An elevated temperature here and nowhere else could mean that this chip is

defective.

PS0 Health – Deprecated. This field will always report N/A in a COM46.

PS1 Health – Deprecated. This field will always report N/A in a COM46.

Fan0 Health – This field reports the health for Fan 0. If the fan is connected and operating

properly, the value should return “OK”. If there is a problem with either of these things, the

value will return “Fault”.

*See device labeled “Exhaust Fan 1” in Figure 3 in Section 3.1.2.

Fan1 Health – This field reports the health for Fan 1. If the fan is connected and operating

properly, the value should return “OK”. If there is a problem with either of these things, the

value will return “Fault”.

*See device labeled “Exhaust Fan 2” in Figure 3 in Section 3.1.2.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 127 128

Sem comentários

Technicolor COM2000 Manual do Operador Página 82